{"title":"Wi-Fi Access Points","description":"\u003cp\u003eDrayTek VigorAP ceiling and wall Wi-Fi access points, powered over Ethernet.\u003c\/p\u003e","products":[{"product_id":"draytek-vigorap-905-dual-band-385927","title":"DrayTek VigorAP 905 Wi-Fi 6 AX3000 Mesh Access Point","description":"\u003ch3\u003eVigorAP 905\u003c\/h3\u003e\r\n\u003ch4\u003eWall\/Desk AX3000 Mesh Wireless Access Point\u003c\/h4\u003e\r\n\u003cp\u003eThe VigorAP 905 is a high-performance WiFi 6 Mesh Wireless Access Point. It offers up to 3Gbps dual-band wireless performance and up to 2.5Gb Ethernet connectivity. The additional Gigabit Ethernet ports can be used as a mini switch to connect computers or printers. The AP can be mounted on a wall or placed on a desk.\u003c\/p\u003e\r\n\u003ch3\u003eWi-Fi 6 - Fast \u0026amp; Efficient\u003c\/h3\u003e\r\n\u003cp\u003eThe DrayTek VigorAP 905 is a Wi-Fi 6 AX3000 access point with 2.5Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users and devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\u003cbr\u003eThis powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\u003c\/p\u003e\r\n\u003cp\u003eWith more available capacity being essential for the volume of data traffic generated by voice, video, and gaming applications, Wi-Fi 6 utilises the following key technologies:\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eLess Interference with BSS Colouring\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eImproved Security with WPA3\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eFor more details about WiFi 6 visit our blog.\u003c\/p\u003e\r\n\u003ch4\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/h4\u003e\r\n\u003cp\u003eA key feature of Wi-Fi 6 is OFDMA, short for Orthogonal Frequency Division Multiple Access. 4G networks and now Wi-Fi 6 use this to provide data to many users at once.\u003c\/p\u003e\r\n\u003cp\u003eWith previous Wi-Fi standards, wireless communication simply sent to one client, then moved on to send to the next. This becomes more inefficient as the number of clients connected increases, users wait longer for their turn, causing more packet loss, laggy video and buffering.\u003c\/p\u003e\r\n\u003cp\u003eOFDMA splits up the channel bandwidth and uses complex scheduling in the background to determine which users need more resources at any one moment. Users watching videos would be allocated more, while a phone just checking email or on a voice call would be assigned less, just as much as each one requires.\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\n\u003cth\u003e\r\n\u003ch4\u003eWi-Fi 6 OFDMA\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003cth\u003e\r\n\u003ch4\u003eOlder Wi-Fi Standards\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eThe result is that everyone receives data more regularly and with greater overall speeds, making each AP more able to service more clients, doing more.\u003c\/p\u003e\r\n\u003cp\u003eIn addition, 802.11ax makes improvements to Multi-User MIMO, where the previous standard only supported this for downstream, 802.11ax improves this to support both directions.\u003c\/p\u003e\r\n\u003ch4\u003eLess Interference with BSS Colouring\u003c\/h4\u003e\r\n\u003cp\u003eManaging interference with wireless networks is often difficult, whether conflicting with neighbouring networks or managing channel assignment for wireless networks spanning multiple APs; If another network is transmitting on the same channel, this will cause drops in performance for everyone, while clients and access points wait for the air to clear before sending.\u003c\/p\u003e\r\n\u003cp\u003eWi-Fi 6 introduces a feature called 'BSS Colouring', with BSS being the Basic Service Set, or Access Point. Each Wi-Fi 6 wireless network adds a unique identifier\/number to its transmissions. Wi-Fi 6 clients can use this to determine whether transmissions are coming from their own network or another. If the detected transmission doesn't match the BSS Colour of the wireless network, the client can choose to ignore the transmission if it's far enough away.\u003c\/p\u003e\r\n\u003cp\u003eThe result is better performance and better handling of interference, where wireless channels are shared with other networks.\u003c\/p\u003e\r\n\u003ch4\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/h4\u003e\r\n\u003cp\u003eThe 802.11ax standard brings performance improvements to both 2.4GHz and 5GHz bands, giving better performance to both. The previous 802.11ac Wi-Fi 5 standard only brought its performance improvements to the larger 5GHz band.\u003c\/p\u003e\r\n\u003cp\u003eThis allows for better performance at range and through walls with 2.4GHz frequency, while still having all the benefits of Wi-Fi 6 technology. Allowing the VigorAP and its clients to make full use of the bandwidth available.\u003c\/p\u003e\r\n\u003ch4\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/h4\u003e\r\n\u003cp\u003eWith more and more connected devices, including IoT smart devices, many of which run on batteries, improving battery life is always a priority.\u003c\/p\u003e\r\n\u003cp\u003eTarget Wake Time allows client devices to extend their battery life, by staying in lower power states for longer. Only checking in with the wireless network when needed.\u003c\/p\u003e\r\n\u003cp\u003eInstead of periodically contacting an access point to stay connected, Wi-Fi 6 client devices negotiate with the VigorAP access point, arranging when to start transmitting again to suit their requirements.\u003c\/p\u003e\r\n\u003ch3\u003eWPA3 Wireless Security \u0026amp; VLANs\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 905 supports the latest WPA3 security standards and offers a multitude of network management features to allow implementation of complex wireless networks.\u003c\/p\u003e\r\n\u003cp\u003eWPA3-Enterprise security offers greater 192-bit encryption strength for networks using RADIUS \u0026amp; 802.1x authentication. RADIUS authentication can be managed with an external server RADIUS server.\u003c\/p\u003e\r\n\u003cp\u003eThe VigorAP 905 supports up to 8 wireless networks per wireless band. Fully segmented from each other with 802.1q VLANs, guest network access is fully separated from internal company data.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about WPA3 Wireless Security with DrayTek products.\u003c\/p\u003e\r\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\r\n\u003cp\u003eMesh wireless enables wireless networks to provide fast connectivity to all clients without cabling between VigorAP access points. Simply set up a Mesh Root and add some Nodes with the DrayTek Wireless App and the DrayTek Mesh will determine the best path between access points to provide the best user experience.\u003c\/p\u003e\r\n\u003cp\u003eThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2865ax. The self-healing Mesh allows VigorAPs to re-establish their links if one VigorAP in the chain if the signal is blocked to a Mesh Nodes usual uplink.\u003c\/p\u003e\r\n\u003cp\u003eYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh. Internet connectivity relays through the Mesh, using the 5GHz Wi-Fi 6 radio to rapidly transfer your data through other VigorAPs in the Mesh.\u003c\/p\u003e\r\n\u003ch4\u003eMesh - Auto-Optimising \u0026amp; Self-Healing\u003c\/h4\u003e\r\n\u003cp\u003eA DrayTek Mesh Wireless network can easily add new Mesh Nodes to expand. It self-organises links between up to 8 DrayTek VigorAP access points, ensuring the best coverage and performance.\u003c\/p\u003e\r\n\u003cp\u003eIf a Mesh Node's loses contact with its uplink, for instance if there's interference or the VigorAP it connects to is turned off, each Mesh Node VigorAP automatically re-connects to the next available point, resuming service with no manual intervention required.\u003c\/p\u003e\r\n\u003cp\u003eMesh Nodes further away will connect wirelessly to the nearest Mesh Node, with up to 3 wireless hops.\u003c\/p\u003e\r\n\u003cp\u003eAlternatively, where a network connection is available for a VigorAP, join a Mesh Node to the network through Ethernet. Mesh Nodes nearby can join it instead of the Mesh Root, reducing wireless hops and improving overall performance.\u003c\/p\u003e\r\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's Mesh system supports 802.1q VLAN tagging for its multiple Wireless networks (or SSIDs), over both wireless and wired Mesh links between VigorAPs.\u003c\/p\u003e\r\n\u003cp\u003eEach SSID provided by the Mesh network can have a VLAN tag assigned to it. VLAN tags are interpreted by the network's router and switch(es) to segregate one network from another. For instance keeping devices connecting to a guest network separate from resources on the private, internal network.\u003c\/p\u003e\r\n\u003cp\u003eSetting up a Mesh network to work with VLANs only requires setting up the Mesh Root with the VLAN tags on its SSIDs. This change is synced to Mesh Nodes allowing Multi-SSID over Mesh to be used just like a cabled network of access points.\u003c\/p\u003e\r\n\u003ch3\u003e2.5 Gigabit and 4 x Gigabit Ethernet Ports\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 905 has 5 Ethernet ports. The first interface can handle up to 2.5 Gigabit throughput that can be linked with a faster device such as the Vigor 2136 router. The additional four Gigabit Ethernet ports can be used for a daisy-chain connection to another access point or as a wired link to a local printer, computers or servers.\u003c\/p\u003e\r\n\u003cp\u003eIn Mesh and Range Extender modes, the VigorAP 905 bridges its wireless uplink to the LAN ports, providing fast connectivity to each additional device connected, without the need for an additional network switch or a long cable run.\u003c\/p\u003e\r\n\u003ch3\u003eEasy Setup with the DrayTek Wireless app\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's Wireless app assists you with setting up VigorAP 905 access points and a Mesh Wireless network.\u003c\/p\u003e\r\n\u003cp\u003eOnce installed on your Smartphone or Tablet, use the Quick Start Wizard to set your VigorAPs to operate as a Mesh Wireless network. Set up a single VigorAP 905 as a stand-alone Access Point, or extend an existing wireless network as a Range Extender.\u003c\/p\u003e\r\n\u003cp\u003eSimply scan the access point’s QR code to detect it, or manually input the VigorAPs default SSID \u0026amp; password, then configure your wireless network with step-by-step guidance.\u003c\/p\u003e\r\n\u003cp\u003eWhen it’s all set up, view the Mesh Wireless status and connected wireless clients from the app.\u003c\/p\u003e\r\n\u003cp\u003eWatch Video\u003c\/p\u003e\r\n\u003ch3\u003eDesk or Wall Mounted\u003c\/h3\u003e\r\n\u003cp\u003eFor a convenient and tidy installation, the VigorAP 905 is designed for installation on walls or free standing. It's ideal for providing wireless access to large rooms and public spaces. Just find a stable, flat location such as a desk to benefit from wired and wireless access to the network. For mounting on solid walls, a mounting kit (included with the unit) is provided.\u003c\/p\u003e\r\n\u003cp\u003eYou can expand wireless coverage quickly and easily with the VigorAP 905, just plug it into a power socket, and connect to the LAN via an Ethernet cable or over the wifi.\u003c\/p\u003e\r\n\u003cp\u003eThe indicator LEDs of the VigorAP that normally show the VigorAP's status, can be disabled or scheduled to avoid them lighting up a room.\u003c\/p\u003e\r\n\u003ch3\u003eAP \u0026amp; Repeater Modes\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 905is configurable to suit most networks, with AP and Range Extender modes. In addition to its Mesh capability, it's ideal as a stand-alone Access Point to provide Wi-Fi connectivity for routers and networks without wireless.\u003c\/p\u003e\r\n\u003cp\u003eUse the VigorAP 905 as a Range Extender to connect to any existing wireless network and boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\u003c\/p\u003e\r\n\u003ch3\u003eCloud Management and More\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek VigorAP wireless access points can be managed as stand-alone APs with their extensive web user interface.\u003c\/p\u003e\r\n\u003cp\u003eTo manage more than one access point, either for a single site or spanning multiple sites, DrayTek offer a multitude of options for managing VigorAP access points:\u003c\/p\u003e\r\n\u003ch4\u003eCloud Management - VigorACS\u003c\/h4\u003e\r\n\u003cp\u003eDrayTek's VigorACS central management platform makes it possible to manage all DrayTek products from the Cloud or your own private server. DrayTek's access points, switches and routers can all be managed through the VigorACS management portal, with all of the menu options and features available, just as if they were being set up locally. Dashboard view gives a full overview of a VigorAP's status and usage.\u003c\/p\u003e\r\n\u003cp\u003eVigorACS is great for managing VigorAPs spread across multiple sites, with AP profiles to configure wireless settings, passwords and VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Cloud Management and Multi-Site Management.\u003c\/p\u003e\r\n\u003cp\u003eTo learn more about DrayTek's VigorACS central management platform, click here.\u003c\/p\u003e\r\n\u003ch4\u003eRouter-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eManaged VigorAP access points centrally through DrayTek Vigor router's web interface, to rapidly provision complex wireless configuration. Ideal for networks with 10 to 50 VigorAP access points, either on a single site or across multiple sites connected via VPN tunnel.\u003c\/p\u003e\r\n\u003cp\u003eProvision selected groups to configure them all at once. Optional Auto Provisioning provisions VigorAPs straight out of the box with your Wireless configuration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management and Multi-Site Management via VPN. Up to 50 VigorAP, depending on router model.\u003c\/p\u003e\r\n\u003ch4\u003eVigorAP-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eNew to the VigorAP 905 is the ability to manage all VigorAPs on one site as a group. Simply assign one VigorAP to work as the Root AP and discover other APs on the network to manage them as a group. Any changes made on the root VigorAP can be quickly provisioned to the rest of the group.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management without DrayTek Vigor router. Up to 20 VigorAPs.\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003ch3\u003eAP Assisted Roaming\u003c\/h3\u003e\r\n\u003cp\u003eLarge wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\u003c\/p\u003e\r\n\u003cp\u003eDrayTek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, VigorAPs communicate with each other to determine which clients can get a better signal as those clients move around.\u003c\/p\u003e\r\n\u003cp\u003eIf a client moves into range of another VigorAP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal and better speeds.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about AP Assisted Roaming.\u003c\/p\u003e\r\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the wider 5GHz band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003ePer-SSID Client Limit\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eControl the number of clients that can connect to any one SSID on the VigorAP along with limiting data rates, for instance limiting a guest network to 10 clients to avoid overloading or disrupting a more important internal network.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eStation Control\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eLimit connection time for individual devices to the VigorAP. Set the limit from 30 minutes to multiple days, once the timer runs out that user is disconnected from the VigorAP and can't reconnect until the selected Reconnection time has passed. Users connecting to a hospitality Wi-Fi network could be limited to one hour of wireless access, at which point they can't reconnect until 2 hours have elapsed.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eIGMP Snooping\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIGMP Multicast traffic broadcasts can use significant amounts of a wireless access point's available throughput. IGMP snooping allows the VigorAP to determine which clients need to receive these IGMP packets on either the 2.4GHz and 5GHz bands. Once enabled, the VigorAP will only send out IGMP packets to clients that have requested to receive it, leaving throughput available to serve more clients effectively.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003ch3\u003ePower-over-Ethernet\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 905 has built-in PoE+ (IEEE 802.3at Power over Ethernet) as standard. Connect the VigorAP to a PoE+ enabled Ethernet switch or PoE+ injector to power it without local power to the unit (power supply) - the VigorAP 905 will take its power from the Ethernet cable. The VigorAP 905 supports 2.5GbE PoE+ (you can also use a Gigabit PoE+ switch\/injector) such as our VigorSwitch PQ2200xb or P2100 models (or any other 802.3at device).\u003c\/p\u003e\r\n\u003cp\u003ePoE is ideal for situations where you do not have mains power available in the exact location where you want to install the VigorAP 905 or just for general aesthetic neatness, perhaps where the AP is installed somewhere prominent.\u003c\/p\u003e\r\n\u003cp\u003eThe DrayTek VigorAP 905 is also supplied with an AC\/DC mains PSU for installations where you are not using PoE.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823024865612,"sku":"CMS-385927","price":131.11,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/zoom_00_385927.jpg?v=1794089793"},{"product_id":"draytek-vap1062c-k-wireless-access-point-6000-mbit-s-white-power-over-ethernet-poe-312881","title":"DrayTek VigorAP 1062C Wi-Fi 6 AX6000 Ceiling Access Point","description":"\u003ch3\u003eWi-Fi 6 - Fast \u0026amp; Efficient\u003c\/h3\u003e\r\n\u003cp\u003eThe DrayTek VigorAP 1062C is a Wi-Fi 6 AX6000 access point with 2.5Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users and devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\u003cbr\u003eThis powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\u003c\/p\u003e\r\n\u003cp\u003eWith more available capacity being essential for the volume of data traffic generated by voice, video, and gaming applications, Wi-Fi 6 utilises the following key technologies:\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eLess Interference with BSS Colouring\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eImproved Security with WPA3\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eFor more details about WiFi 6 visit our blog.\u003c\/p\u003e\r\n\u003ch4\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/h4\u003e\r\n\u003cp\u003eA key feature of Wi-Fi 6 is OFDMA, short for Orthogonal Frequency Division Multiple Access. 4G networks and now Wi-Fi 6 use this to provide data to many users at once.\u003c\/p\u003e\r\n\u003cp\u003eWith previous Wi-Fi standards, wireless communication simply sent to one client, then moved on to send to the next. This becomes more inefficient as the number of clients connected increases, users wait longer for their turn, causing more packet loss, laggy video and buffering.\u003c\/p\u003e\r\n\u003cp\u003eOFDMA splits up the channel bandwidth and uses complex scheduling in the background to determine which users need more resources at any one moment. Users watching videos would be allocated more, while a phone just checking email or on a voice call would be assigned less, just as much as each one requires.\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\n\u003cth\u003e\r\n\u003ch4\u003eWi-Fi 6 OFDMA\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003cth\u003e\r\n\u003ch4\u003eOlder Wi-Fi Standards\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eThe result is that everyone receives data more regularly and with greater overall speeds, making each AP more able to service more clients, doing more.\u003c\/p\u003e\r\n\u003cp\u003eIn addition, 802.11ax makes improvements to Multi-User MIMO, where the previous standard only supported this for downstream, 802.11ax improves this to support both directions.\u003c\/p\u003e\r\n\u003ch4\u003eLess Interference with BSS Colouring\u003c\/h4\u003e\r\n\u003cp\u003eManaging interference with wireless networks is often difficult, whether conflicting with neighbouring networks or managing channel assignment for wireless networks spanning multiple APs; If another network is transmitting on the same channel, this will cause drops in performance for everyone, while clients and access points wait for the air to clear before sending.\u003c\/p\u003e\r\n\u003cp\u003eWi-Fi 6 introduces a feature called 'BSS Colouring', with BSS being the Basic Service Set, or Access Point. Each Wi-Fi 6 wireless network adds a unique identifier\/number to its transmissions. Wi-Fi 6 clients can use this to determine whether transmissions are coming from their own network or another. If the detected transmission doesn't match the BSS Colour of the wireless network, the client can choose to ignore the transmission if it's far enough away.\u003c\/p\u003e\r\n\u003cp\u003eThe result is better performance and better handling of interference, where wireless channels are shared with other networks.\u003c\/p\u003e\r\n\u003ch4\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/h4\u003e\r\n\u003cp\u003eThe 802.11ax standard brings performance improvements to both 2.4GHz and 5GHz bands, giving better performance to both. The previous 802.11ac Wi-Fi 5 standard only brought its performance improvements to the larger 5GHz band.\u003c\/p\u003e\r\n\u003cp\u003eThis allows for better performance at range and through walls with 2.4GHz frequency, while still having all the benefits of Wi-Fi 6 technology. Allowing the VigorAP and its clients to make full use of the bandwidth available.\u003c\/p\u003e\r\n\u003ch4\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/h4\u003e\r\n\u003cp\u003eWith more and more connected devices, including IoT smart devices, many of which run on batteries, improving battery life is always a priority.\u003c\/p\u003e\r\n\u003cp\u003eTarget Wake Time allows client devices to extend their battery life, by staying in lower power states for longer. Only checking in with the wireless network when needed.\u003c\/p\u003e\r\n\u003cp\u003eInstead of periodically contacting an access point to stay connected, Wi-Fi 6 client devices negotiate with the VigorAP access point, arranging when to start transmitting again to suit their requirements.\u003c\/p\u003e\r\n\u003ch3\u003eWPA3 Wireless Security \u0026amp; VLANs\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1062C supports the latest WPA3 security standards and offers a multitude of network management features to allow implementation of complex wireless networks. Hotspot Web Portal is also available for Captive Portal and branding on hospitality Wi-Fi networks.\u003c\/p\u003e\r\n\u003cp\u003eWPA3-Enterprise security offers greater 192-bit encryption strength for networks using RADIUS \u0026amp; 802.1x authentication. RADIUS authentication can be managed either with an external server or the VigorAP's built-in RADIUS server.\u003c\/p\u003e\r\n\u003cp\u003eThe VigorAP 1062C supports up to 8 wireless networks per wireless band. Fully segmented from each other with 802.1q VLANs, guest network access is fully separated from internal company data.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about WPA3 Wireless Security with DrayTek products.\u003c\/p\u003e\r\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\r\n\u003cp\u003eMesh wireless enables wireless networks to provide fast connectivity to all clients without cabling between VigorAP access points. Simply set up a Mesh Root and add some Nodes with the DrayTek Wireless App and the DrayTek Mesh will determine the best path between access points to provide the best user experience.\u003c\/p\u003e\r\n\u003cp\u003eThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2865ac. The self-healing Mesh allows VigorAPs to re-establish their links if one VigorAP in the chain if the signal is blocked to a Mesh Nodes usual uplink.\u003c\/p\u003e\r\n\u003cp\u003eYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh. Internet connectivity relays through the Mesh, using the 5GHz Wi-Fi 6 radio to rapidly transfer your data through other VigorAPs in the Mesh.\u003c\/p\u003e\r\n\u003ch4\u003eMesh - Auto-Optimising \u0026amp; Self-Healing\u003c\/h4\u003e\r\n\u003cp\u003eA DrayTek Mesh Wireless network can easily add new Mesh Nodes to expand. It self-organises links between up to 8 DrayTek VigorAP access points, ensuring the best coverage and performance.\u003c\/p\u003e\r\n\u003cp\u003eIf a Mesh Node's loses contact with its uplink, for instance if there's interference or the VigorAP it connects to is turned off, each Mesh Node VigorAP automatically re-connects to the next available point, resuming service with no manual intervention required.\u003c\/p\u003e\r\n\u003cp\u003eMesh Nodes further away will connect wirelessly to the nearest Mesh Node, with up to 3 wireless hops.\u003c\/p\u003e\r\n\u003cp\u003eAlternatively, where a network connection is available for a VigorAP, join a Mesh Node to the network through Ethernet. Mesh Nodes nearby can join it instead of the Mesh Root, reducing wireless hops and improving overall performance.\u003c\/p\u003e\r\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's Mesh system supports 802.1q VLAN tagging for its multiple Wireless networks (or SSIDs), over both wireless and wired Mesh links between VigorAPs.\u003c\/p\u003e\r\n\u003cp\u003eEach SSID provided by the Mesh network can have a VLAN tag assigned to it. VLAN tags are interpreted by the network's router and switch(es) to segregate one network from another. For instance keeping devices connecting to a guest network separate from resources on the private, internal network.\u003c\/p\u003e\r\n\u003cp\u003eSetting up a Mesh network to work with VLANs only requires setting up the Mesh Root with the VLAN tags on its SSIDs. This change is synced to Mesh Nodes allowing Multi-SSID over Mesh to be used just like a cabled network of access points.\u003c\/p\u003e\r\n\u003ch3\u003e2.5 Gigabit Power-over-Ethernet\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1062C is designed to suit any application, with higher throughput of up to 2.5 Gigabit Ethernet interface, and built-in PoE (Standard IEEE 802.3af Power over Ethernet) as standard, along with the option for powering via DC power supply. Connect the VigorAP to a PoE-enabled Ethernet switch or PoE injector to power it without local power to the unit (power supply) - the VigorAP 1062C will take its power from the Ethernet cable.\u003c\/p\u003e\r\n\u003cp\u003ePoE is ideal for office installations where Ethernet is available but power isn't. It also provides some great management features, the PoE Device Check feature of PoE VigorSwitch switches can monitor and alert if a PoE device stops responding, or providing its services.\u003c\/p\u003e\r\n\u003cp\u003eIn Mesh wireless networks, where PoE may not be possible, the VigorAP 1062C can be powered via DC power supply, with its Ethernet port available for use as an uplink to the Mesh network.\u003c\/p\u003e\r\n\u003ch3\u003eEasy Setup with the DrayTek Wireless app\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's Wireless app assists you with setting up VigorAP 1062C access points and a Mesh Wireless network.\u003c\/p\u003e\r\n\u003cp\u003eOnce installed on your Smartphone or Tablet, use the Quick Start Wizard to set your VigorAPs to operate as a Mesh Wireless network. Set up a single VigorAP 1062C as a stand-alone Access Point, or extend an existing wireless network as a Range Extender.\u003c\/p\u003e\r\n\u003cp\u003eSimply scan the access point’s QR code to detect it, or manually input the VigorAPs default SSID \u0026amp; password, then configure your wireless network with step-by-step guidance.\u003c\/p\u003e\r\n\u003cp\u003eWhen it’s all set up, view the Mesh Wireless status and connected wireless clients from the app.\u003c\/p\u003e\r\n\u003cp\u003eWatch Video\u003c\/p\u003e\r\n\u003ch3\u003eCeiling or Wall Mounted\u003c\/h3\u003e\r\n\u003cp\u003eFor a convenient and tidy installation, the VigorAP 1062C is designed for installation on ceilings and walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms and public spaces.\u003c\/p\u003e\r\n\u003cp\u003eFor mounting on solid ceilings and walls, a circular mounting plate (included with the unit) is fitted and then the VigorAP 1062C is secured into place by twisting the VigorAP into the mounting plate.\u003c\/p\u003e\r\n\u003cp\u003eFor suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\u003c\/p\u003e\r\n\u003cp\u003eCabling for the VigorAP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\u003c\/p\u003e\r\n\u003ch3\u003eAP \u0026amp; Repeater Modes\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1062C is configurable to suit most networks, with AP and Range Extender modes. In addition to its Mesh capability, it's ideal as a stand-alone Access Point to provide Wi-Fi connectivity for routers and networks without wireless.\u003c\/p\u003e\r\n\u003cp\u003eUse the VigorAP 1062C as a Range Extender to connect to any existing wireless network and boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\u003c\/p\u003e\r\n\u003ch3\u003eCloud Management and More\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek VigorAP wireless access points can be managed as stand-alone APs with their extensive web user interface.\u003c\/p\u003e\r\n\u003cp\u003eTo manage more than one access point, either for a single site or spanning multiple sites, DrayTek offer a multitude of options for managing VigorAP access points:\u003c\/p\u003e\r\n\u003ch4\u003eCloud Management - VigorACS\u003c\/h4\u003e\r\n\u003cp\u003eDrayTek's VigorACS central management platform makes it possible to manage all DrayTek products from the Cloud or your own private server. DrayTek's access points, switches and routers can all be managed through the VigorACS management portal, with all of the menu options and features available, just as if they were being set up locally. Dashboard view gives a full overview of a VigorAP's status and usage.\u003c\/p\u003e\r\n\u003cp\u003eVigorACS is great for managing VigorAPs spread across multiple sites, with AP profiles to configure wireless settings, passwords and VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Cloud Management and Multi-Site Management.\u003c\/p\u003e\r\n\u003cp\u003eTo learn more about DrayTek's VigorACS central management platform, click here.\u003c\/p\u003e\r\n\u003ch4\u003eRouter-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eManaged VigorAP access points centrally through DrayTek Vigor router's web interface, to rapidly provision complex wireless configuration. Ideal for networks with 10 to 50 VigorAP access points, either on a single site or across multiple sites connected via VPN tunnel.\u003c\/p\u003e\r\n\u003cp\u003eProvision selected groups to configure them all at once. Optional Auto Provisioning provisions VigorAPs straight out of the box with your Wireless configuration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management and Multi-Site Management via VPN. Up to 50 VigorAP, depending on router model.\u003c\/p\u003e\r\n\u003ch4\u003eVigorAP-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eNew to the VigorAP 1062C is the ability to manage all VigorAPs on one site as a group. Simply assign one VigorAP to work as the Root AP and discover other APs on the network to manage them as a group. Any changes made on the root VigorAP can be quickly provisioned to the rest of the group.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management without DrayTek Vigor router. Up to 50 VigorAP.\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003ch3\u003eAP Assisted Roaming\u003c\/h3\u003e\r\n\u003cp\u003eLarge wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\u003c\/p\u003e\r\n\u003cp\u003eDrayTek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, VigorAPs communicate with each other to determine which clients can get a better signal as those clients move around.\u003c\/p\u003e\r\n\u003cp\u003eIf a client moves into range of another VigorAP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal and better speeds.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about AP Assisted Roaming.\u003c\/p\u003e\r\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the wider 5GHz band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003ePer-SSID Client Limit\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eControl the number of clients that can connect to any one SSID on the VigorAP along with limiting data rates, for instance limiting a guest network to 10 clients to avoid overloading or disrupting a more important internal network.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eStation Control\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eLimit connection time for individual devices to the VigorAP. Set the limit from 30 minutes to multiple days, once the timer runs out that user is disconnected from the VigorAP and can't reconnect until the selected Reconnection time has passed. Users connecting to a hospitality Wi-Fi network could be limited to one hour of wireless access, at which point they can't reconnect until 2 hours have elapsed.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eIGMP Snooping\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIGMP Multicast traffic broadcasts can use significant amounts of a wireless access point's available throughput. IGMP snooping allows the VigorAP to determine which clients need to receive these IGMP packets on either the 2.4GHz and 5GHz bands. Once enabled, the VigorAP will only send out IGMP packets to clients that have requested to receive it, leaving throughput available to serve more clients effectively.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823025291596,"sku":"CMS-312881","price":212.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_312881.jpg?v=1794089797"},{"product_id":"draytek-vigorap-1070c-11be-ceiling-ap","title":"DrayTek VigorAP 1070C Wi-Fi 7 BE19000 Ceiling Access Point","description":"\u003ch3\u003eVigorAP 1070C\u003c\/h3\u003e\r\n\u003ch4\u003eWi-Fi 7 Ceiling or Wall Mounted BE 19000 Mesh Wireless PoE Access Point\u003c\/h4\u003e\r\n\u003cp\u003eThe VigorAP 1070C is a high-performance wireless access point designed for business where speed matters. This ceiling or wall-mounted mesh access point delivers tri-band wireless performance of up to 19Gbps (BE 19000), providing fast and reliable Wi-Fi 7 connectivity for a demanding network.\u003c\/p\u003e\r\n\u003cp\u003eEquipped with ultra-high-speed 10GbE and 2.5GbE Ethernet interfaces, the VigorAP 1070C ensures high-capacity wired connectivity to fully support next-generation Wi-Fi 7 throughput, cloud applications, and multi-gigabit network infrastructure.\u003c\/p\u003e\r\n\u003cp\u003eAdvanced Wi-Fi 7 technologies including Multi-Link Operation (MLO), OFDMA, MU-MIMO, and 4K-QAM deliver lower latency, improved efficiency, and reliable wireless performance for hundreds of connected devices.\u003c\/p\u003e\r\n\u003ch3\u003eWi-Fi 7 - Fast \u0026amp; Efficient\u003c\/h3\u003e\r\n\u003cp\u003eThe DrayTek VigorAP 1070C is a high-performance Tri-Band Wi-Fi 7 access point delivering BE19000 wireless speeds across the 2.4GHz, 5GHz, and 6GHz bands.\u003c\/p\u003e\r\n\u003cp\u003eDesigned for enterprise-grade connectivity, the VigorAP 1070C supports up to 512 concurrent wireless clients while delivering ultra-fast throughput and low latency for AI applications, cloud computing, hybrid working, 4K\/8K streaming, and immersive collaboration tools.\u003c\/p\u003e\r\n\u003cp\u003eBuilt on the latest Wi-Fi 7 (802.11be) standard, the VigorAP 1070C introduces advanced wireless technologies and efficiency improvements designed for modern high-density business networks:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMulti-Link Operation (MLO)\u003c\/strong\u003e allows compatible Wi-Fi 7 devices to simultaneously transmit and receive data across multiple bands, reducing latency while improving throughput and connection reliability.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003e4K-QAM Technology\u003c\/strong\u003e increases data density for significantly higher wireless throughput, delivering faster speeds for bandwidth-intensive applications and next-generation devices.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eOFDMA and MU-MIMO\u003c\/strong\u003e improve wireless efficiency by serving multiple users and devices simultaneously, helping maintain consistent performance in busy enterprise and high-density environments.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003e6GHz Wi-Fi\u003c\/strong\u003e provides access to cleaner spectrum, reduced interference, and support for wider 320MHz channels, enabling ultra-fast low-latency wireless connectivity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe VigorAP 1070C supports up to 24 SSIDs, with up to 8 SSIDs per wireless band, making it ideal for separate business, guest, IoT, and voice wireless networks.\u003c\/p\u003e\r\n\u003ch4\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/h4\u003e\r\n\u003cp\u003eWi-Fi 7 enhances wireless efficiency with advanced OFDMA and Multi-User MIMO technologies, allowing the VigorAP 1070C to communicate with multiple devices simultaneously instead of serving one device at a time.\u003c\/p\u003e\r\n\u003cp\u003eIn busy wireless environments such as offices, schools, hospitality venues, and conference spaces, traditional wireless networks can become congested as more users compete for airtime. This can lead to increased latency, buffering, inconsistent video calls, and reduced overall performance.\u003c\/p\u003e\r\n\u003cp\u003eUsing OFDMA, the VigorAP 1070C intelligently divides wireless channels into smaller resource units, efficiently allocating bandwidth to connected devices based on demand. Combined with MU-MIMO technology, multiple users can transmit and receive data simultaneously for smoother real-time collaboration, cloud applications, streaming, and voice services.\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003e\r\n\u003ch4\u003eWi-Fi 7 OFDMA\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\r\n\u003ch4\u003eOlder Wi-Fi Standards\u003c\/h4\u003e\r\n\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eThe result is faster and more consistent wireless performance across the network, particularly in high-density deployments where many users and devices require reliable low-latency connectivity at the same time.\u003c\/p\u003e\r\n\u003cp\u003eWith support for advanced Wi-Fi 7 wireless optimisation technologies, the VigorAP 1070C helps businesses deliver stable high-speed wireless connectivity for hybrid working, 4K video conferencing, BYOD environments, and bandwidth-intensive enterprise applications.\u003c\/p\u003e\r\n\u003ch4\u003eLess Interference with BSS Colouring\u003c\/h4\u003e\r\n\u003cp\u003eWireless interference is a common challenge in high-density environments where multiple access points and neighbouring networks compete for the same wireless channels. As more devices transmit simultaneously, congestion can reduce throughput, increase latency, and negatively impact wireless reliability.\u003c\/p\u003e\r\n\u003cp\u003eBSS Colouring helps the VigorAP 1070C identify transmissions from neighbouring wireless networks and distinguish them from its own traffic. By intelligently recognising overlapping signals, compatible wireless clients can reduce unnecessary waiting time and make more efficient use of available wireless spectrum.\u003c\/p\u003e\r\n\u003cp\u003eThe result is improved wireless efficiency, reduced interference, and more stable performance in busy business environments such as offices, apartment buildings, schools, retail spaces, and multi-AP deployments.\u003c\/p\u003e\r\n\u003ch4\u003eTri-Band Wi-Fi 7 Performance Across 2.4GHz, 5GHz, and 6GHz\u003c\/h4\u003e\r\n\u003cp\u003eThe VigorAP 1070C delivers high-performance Tri-Band Wi-Fi 7 connectivity across the 2.4GHz, 5GHz, and 6GHz wireless bands, allowing devices to connect using the most suitable frequency for speed, range, and overall network efficiency.\u003c\/p\u003e\r\n\u003cp\u003eThe 2.4GHz band provides wider coverage and improved performance through walls and obstacles, while the 5GHz and 6GHz bands deliver higher throughput, lower latency, and reduced interference for demanding modern applications including cloud services, 4K video conferencing, streaming, and large file transfers.\u003c\/p\u003e\r\n\u003cp\u003eWith support for wider Wi-Fi 7 channels, advanced modulation technologies, and intelligent client distribution across all three wireless bands, the VigorAP 1070C helps businesses maintain fast and reliable wireless connectivity even in high-density enterprise environments.\u003c\/p\u003e\r\n\u003ch3\u003eWPA3 Wireless Security \u0026amp; VLANs\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1070C supports the latest WPA3 wireless security standards alongside advanced network segmentation features, helping businesses securely deploy high-performance wireless networks for staff, guests, IoT devices, and business-critical applications.\u003c\/p\u003e\r\n\u003cp\u003eWPA3-Enterprise provides enhanced wireless protection with stronger authentication and 192-bit encryption for enterprise environments using RADIUS and 802.1X authentication. The VigorAP 1070C can integrate with external RADIUS servers or utilise its built-in RADIUS functionality for flexible deployment.\u003c\/p\u003e\r\n\u003cp\u003eSupport for up to 8 SSIDs per wireless band, combined with 802.1Q VLAN tagging, allows businesses to securely separate internal networks, guest access, voice services, and IoT devices across the same wireless infrastructure while maintaining secure traffic isolation.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about WPA3 Wireless Security with DrayTek products.\u003c\/p\u003e\r\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\r\n\u003cp\u003eMesh wireless enables flexible high-performance wireless deployments without requiring cabling between VigorAP access points. Simply configure a Mesh Root and add Mesh Nodes using the DrayTek Wireless app, while the Mesh system automatically determines the optimal wireless path for reliable connectivity and coverage.\u003c\/p\u003e\r\n\u003cp\u003eThe Mesh Root VigorAP connects to your existing network infrastructure, such as a DrayTek Vigor 2928be router. The self-healing Mesh system automatically re-establishes wireless links if interference or signal changes affect a Mesh Node’s normal uplink path.\u003c\/p\u003e\r\n\u003cp\u003eWireless clients connect to a single seamless Wi-Fi network (SSID), with devices automatically connecting to the nearest VigorAP for optimal performance. High-speed wireless backhaul between Mesh access points helps maintain fast and reliable connectivity throughout the network.\u003c\/p\u003e\r\n\u003ch4\u003eSelf-Healing and Intelligent Mesh Optimisation\u003c\/h4\u003e\r\n\u003cp\u003eA DrayTek Mesh Wireless network can easily expand by adding additional Mesh Nodes. The system intelligently organises wireless links between up to 8 DrayTek VigorAP access points to optimise coverage, stability, and performance.\u003c\/p\u003e\r\n\u003cp\u003eIf a Mesh Node loses connectivity to its preferred uplink, for example due to interference or environmental changes, it can automatically reconnect through another available Mesh access point with no manual intervention required.\u003c\/p\u003e\r\n\u003cp\u003eMesh Nodes located further from the Mesh Root can connect through nearby Mesh Nodes, supporting up to three wireless hops for extended coverage.\u003c\/p\u003e\r\n\u003cp\u003eWhere Ethernet connectivity is available, Mesh Nodes can also use wired uplinks to reduce wireless hops and maximise overall wireless performance across the Mesh network.\u003c\/p\u003e\r\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek Mesh wireless supports 802.1Q VLAN tagging across multiple wireless networks (SSIDs), allowing secure network segmentation over both wireless and wired Mesh links between VigorAP access points.\u003c\/p\u003e\r\n\u003cp\u003eEach SSID can be assigned its own VLAN ID, enabling businesses to securely separate internal users, guest access, voice services, and IoT devices across the same wireless infrastructure. VLAN-aware routers and switches maintain traffic isolation between networks for improved security and simplified network management.\u003c\/p\u003e\r\n\u003cp\u003eOnce configured on the Mesh Root, wireless settings and VLAN configurations are automatically synchronised across connected Mesh Nodes, simplifying deployment and ensuring consistent wireless policies throughout the entire Mesh network.\u003c\/p\u003e\r\n\u003ch3\u003e10GbE and 2.5GbE Connectivity with PoE++\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1070C is designed for next-generation business networks, featuring a high-speed 10GbE interface to fully support Wi-Fi 7 BE19000 wireless performance. The 10GbE port also supports IEEE 802.3bt PoE++ for both power and network connectivity through a single Ethernet cable, while the additional 2.5GbE port can be used for wired network expansion, bridging, or connecting additional network devices.\u003c\/p\u003e\r\n\u003cp\u003ePoE++ deployment is ideal for ceiling and wall-mounted business access points where local power may not be conveniently available. Using compatible DrayTek VigorSwitch models, administrators can centrally manage and monitor connected PoE devices across the network infrastructure.\u003c\/p\u003e\r\n\u003cp\u003eFor deployment flexibility, the VigorAP 1070C can also be powered using an optional DC power adapter, making it suitable for standalone installations and Mesh wireless environments where PoE may not be available.\u003c\/p\u003e\r\n\u003ch3\u003eCeiling or Wall Mounted\u003c\/h3\u003e\r\n\u003cp\u003eFor a convenient and tidy installation, the VigorAP 1070C is designed for installation on ceilings and walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms and public spaces.\u003c\/p\u003e\r\n\u003cp\u003eFor mounting on solid ceilings and walls, a circular mounting plate (included with the unit) is fitted and then the VigorAP 1070C is secured into place by twisting the VigorAP into the mounting plate.\u003c\/p\u003e\r\n\u003cp\u003eFor suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\u003c\/p\u003e\r\n\u003cp\u003eCabling for the VigorAP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\u003c\/p\u003e\r\n\u003ch3\u003eCloud Management and More\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek VigorAP wireless access points can be managed as stand-alone APs with their extensive web user interface.\u003c\/p\u003e\r\n\u003cp\u003eTo manage more than one access point, either for a single site or spanning multiple sites, DrayTek offer a multitude of options for managing VigorAP access points:\u003c\/p\u003e\r\n\u003ch4\u003eCloud Management - VigorACS\u003c\/h4\u003e\r\n\u003cp\u003eDrayTek's VigorACS central management platform makes it possible to manage all DrayTek products from the Cloud or your own private server. DrayTek's access points, switches and routers can all be managed through the VigorACS management portal, with all of the menu options and features available, just as if they were being set up locally. Dashboard view gives a full overview of a VigorAP's status and usage.\u003c\/p\u003e\r\n\u003cp\u003eVigorACS is great for managing VigorAPs spread across multiple sites, with AP profiles to configure wireless settings, passwords and VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Cloud Management and Multi-Site Management.\u003c\/p\u003e\r\n\u003cp\u003eTo learn more about DrayTek's VigorACS central management platform, click here.\u003c\/p\u003e\r\n\u003ch4\u003eRouter-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eManaged VigorAP access points centrally through DrayTek Vigor router's web interface, to rapidly provision complex wireless configuration. Ideal for networks with 10 to 50 VigorAP access points, either on a single site or across multiple sites connected via VPN tunnel.\u003c\/p\u003e\r\n\u003cp\u003eProvision selected groups to configure them all at once. Optional Auto Provisioning provisions VigorAPs straight out of the box with your Wireless configuration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management and Multi-Site Management via VPN. Up to 50 VigorAP, depending on router model.\u003c\/p\u003e\r\n\u003ch4\u003eVigorAP-based Central Management\u003c\/h4\u003e\r\n\u003cp\u003eNew to the VigorAP 1070C is the ability to manage all VigorAPs on one site as a group. Simply assign one VigorAP to work as the Root AP and discover other APs on the network to manage them as a group. Any changes made on the root VigorAP can be quickly provisioned to the rest of the group.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management without DrayTek Vigor router. Up to 50 VigorAP.\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003ch3\u003eAP Assisted Roaming\u003c\/h3\u003e\r\n\u003cp\u003eLarge wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\u003c\/p\u003e\r\n\u003cp\u003eDrayTek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, VigorAPs communicate with each other to determine which clients can get a better signal as those clients move around.\u003c\/p\u003e\r\n\u003cp\u003eIf a client moves into range of another VigorAP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal and better speeds.\u003c\/p\u003e\r\n\u003cp\u003eClick here to learn more about AP Assisted Roaming.\u003c\/p\u003e\r\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\r\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the wider 5GHz band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003ePer-SSID Client Limit\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eControl the number of clients that can connect to any one SSID on the VigorAP along with limiting data rates, for instance limiting a guest network to 10 clients to avoid overloading or disrupting a more important internal network.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eStation Control\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eLimit connection time for individual devices to the VigorAP. Set the limit from 30 minutes to multiple days, once the timer runs out that user is disconnected from the VigorAP and can't reconnect until the selected Reconnection time has passed. Users connecting to a hospitality Wi-Fi network could be limited to one hour of wireless access, at which point they can't reconnect until 2 hours have elapsed.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003ch4\u003eIGMP Snooping\u003c\/h4\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003eIGMP Multicast traffic broadcasts can use significant amounts of a wireless access point's available throughput. IGMP snooping allows the VigorAP to determine which clients need to receive these IGMP packets on either the 2.4GHz and 5GHz bands. Once enabled, the VigorAP will only send out IGMP packets to clients that have requested to receive it, leaving throughput available to serve more clients effectively.\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003ch3\u003eDedicated Third Radio for Zero-Wait DFS and RF Optimisation\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 1070C features a dedicated third 5GHz radio for continuous RF scanning and Zero-Wait DFS operation. This allows the access point to monitor DFS channels for radar activity without interrupting client traffic on the primary wireless radios.\u003c\/p\u003e\r\n\u003cp\u003eThe dedicated scanning radio also supports wireless environment monitoring and RF analytics, helping administrators identify channel congestion, neighbouring access points, airtime utilisation, and potential sources of wireless interference.\u003c\/p\u003e\r\n\u003cp\u003eBy continuously analysing wireless conditions in the background, the VigorAP 1070C can help optimise channel selection and improve overall wireless stability in high-density business environments. This enables more reliable Wi-Fi performance while minimising disruption caused by DFS channel changes.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823025455436,"sku":"CMS-499637","price":428.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/zoom_0_499637.jpg?v=1794089800"},{"product_id":"draytek-vigorap-962c-11ax-ceiling-ap-341763","title":"DrayTek VigorAP 962C Wi-Fi 6 AX3000 Ceiling Access Point","description":"\u003ch3\u003eWi-Fi 6 - Fast \u0026amp; Efficient\u003c\/h3\u003e\n\u003cp\u003eThe DrayTek VigorAP 962C is a Wi-Fi 6 AX3000 access point with 2.5Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users and devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\u003cbr\u003eThis powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\u003c\/p\u003e\n\u003cp\u003eWith more available capacity being essential for the volume of data traffic generated by voice, video, and gaming applications, Wi-Fi 6 utilises the following key technologies:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLess Interference with BSS Colouring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImproved Security with WPA3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor more details about WiFi 6 visit our blog.\u003c\/p\u003e\n\u003ch4\u003eHigher Capacity with OFDMA and Multi-User MIMO\u003c\/h4\u003e\n\u003cp\u003eA key feature of Wi-Fi 6 is OFDMA, short for Orthogonal Frequency Division Multiple Access. 4G networks and now Wi-Fi 6 use this to provide data to many users at once.\u003c\/p\u003e\n\u003cp\u003eWith previous Wi-Fi standards, wireless communication simply sent to one client, then moved on to send to the next. This becomes more inefficient as the number of clients connected increases, users wait longer for their turn, causing more packet loss, laggy video and buffering.\u003c\/p\u003e\n\u003cp\u003eOFDMA splits up the channel bandwidth and uses complex scheduling in the background to determine which users need more resources at any one moment. Users watching videos would be allocated more, while a phone just checking email or on a voice call would be assigned less, just as much as each one requires.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003ch4\u003eWi-Fi 6 OFDMA\u003c\/h4\u003e\n\u003c\/th\u003e\n\u003cth\u003e\n\u003ch4\u003eOlder Wi-Fi Standards\u003c\/h4\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe result is that everyone receives data more regularly and with greater overall speeds, making each AP more able to service more clients, doing more.\u003c\/p\u003e\n\u003cp\u003eIn addition, 802.11ax makes improvements to Multi-User MIMO, where the previous standard only supported this for downstream, 802.11ax improves this to support both directions.\u003c\/p\u003e\n\u003ch4\u003eLess Interference with BSS Colouring\u003c\/h4\u003e\n\u003cp\u003eManaging interference with wireless networks is often difficult, whether conflicting with neighbouring networks or managing channel assignment for wireless networks spanning multiple APs; If another network is transmitting on the same channel, this will cause drops in performance for everyone, while clients and access points wait for the air to clear before sending.\u003c\/p\u003e\n\u003cp\u003eWi-Fi 6 introduces a feature called 'BSS Colouring', with BSS being the Basic Service Set, or Access Point. Each Wi-Fi 6 wireless network adds a unique identifier\/number to its transmissions. Wi-Fi 6 clients can use this to determine whether transmissions are coming from their own network or another. If the detected transmission doesn't match the BSS Colour of the wireless network, the client can choose to ignore the transmission if it's far enough away.\u003c\/p\u003e\n\u003cp\u003eThe result is better performance and better handling of interference, where wireless channels are shared with other networks.\u003c\/p\u003e\n\u003ch4\u003eDual-Band Performance Boost with 2.4GHz and 5GHz Wi-Fi 6\u003c\/h4\u003e\n\u003cp\u003eThe 802.11ax standard brings performance improvements to both 2.4GHz and 5GHz bands, giving better performance to both. The previous 802.11ac Wi-Fi 5 standard only brought its performance improvements to the larger 5GHz band.\u003c\/p\u003e\n\u003cp\u003eThis allows for better performance at range and through walls with 2.4GHz frequency, while still having all the benefits of Wi-Fi 6 technology. Allowing the VigorAP and its clients to make full use of the bandwidth available.\u003c\/p\u003e\n\u003ch4\u003eBetter Battery Life on Mobile Devices with Target Wake Time\u003c\/h4\u003e\n\u003cp\u003eWith more and more connected devices, including IoT smart devices, many of which run on batteries, improving battery life is always a priority.\u003c\/p\u003e\n\u003cp\u003eTarget Wake Time allows client devices to extend their battery life, by staying in lower power states for longer. Only checking in with the wireless network when needed.\u003c\/p\u003e\n\u003cp\u003eInstead of periodically contacting an access point to stay connected, Wi-Fi 6 client devices negotiate with the VigorAP access point, arranging when to start transmitting again to suit their requirements.\u003c\/p\u003e\n\u003ch3\u003eWPA3 Wireless Security \u0026amp; VLANs\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 962C supports the latest WPA3 security standards and offers a multitude of network management features to allow implementation of complex wireless networks. Hotspot Web Portal is also available for Captive Portal and branding on hospitality Wi-Fi networks.\u003c\/p\u003e\n\u003cp\u003eWPA3-Enterprise security offers greater 192-bit encryption strength for networks using RADIUS \u0026amp; 802.1x authentication. RADIUS authentication can be managed either with an external server or the VigorAP's built-in RADIUS server.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 962C supports up to 8 wireless networks per wireless band. Fully segmented from each other with 802.1q VLANs, guest network access is fully separated from internal company data.\u003c\/p\u003e\n\u003cp\u003eClick here to learn more about WPA3 Wireless Security with DrayTek products.\u003c\/p\u003e\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\n\u003cp\u003eMesh wireless enables wireless networks to provide fast connectivity to all clients without cabling between VigorAP access points. Simply set up a Mesh Root and add some Nodes with the DrayTek Wireless App and the DrayTek Mesh will determine the best path between access points to provide the best user experience.\u003c\/p\u003e\n\u003cp\u003eThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2865ax. The self-healing Mesh allows VigorAPs to re-establish their links if one VigorAP in the chain if the signal is blocked to a Mesh Nodes usual uplink.\u003c\/p\u003e\n\u003cp\u003eYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh. Internet connectivity relays through the Mesh, using the 5GHz Wi-Fi 6 radio to rapidly transfer your data through other VigorAPs in the Mesh.\u003c\/p\u003e\n\u003ch4\u003eMesh - Auto-Optimising \u0026amp; Self-Healing\u003c\/h4\u003e\n\u003cp\u003eA DrayTek Mesh Wireless network can easily add new Mesh Nodes to expand. It self-organises links between up to 8 DrayTek VigorAP access points, ensuring the best coverage and performance.\u003c\/p\u003e\n\u003cp\u003eIf a Mesh Node's loses contact with its uplink, for instance if there's interference or the VigorAP it connects to is turned off, each Mesh Node VigorAP automatically re-connects to the next available point, resuming service with no manual intervention required.\u003c\/p\u003e\n\u003cp\u003eMesh Nodes further away will connect wirelessly to the nearest Mesh Node, with up to 3 wireless hops.\u003c\/p\u003e\n\u003cp\u003eAlternatively, where a network connection is available for a VigorAP, join a Mesh Node to the network through Ethernet. Mesh Nodes nearby can join it instead of the Mesh Root, reducing wireless hops and improving overall performance.\u003c\/p\u003e\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Mesh system supports 802.1q VLAN tagging for its multiple Wireless networks (or SSIDs), over both wireless and wired Mesh links between VigorAPs.\u003c\/p\u003e\n\u003cp\u003eEach SSID provided by the Mesh network can have a VLAN tag assigned to it. VLAN tags are interpreted by the network's router and switch(es) to segregate one network from another. For instance keeping devices connecting to a guest network separate from resources on the private, internal network.\u003c\/p\u003e\n\u003cp\u003eSetting up a Mesh network to work with VLANs only requires setting up the Mesh Root with the VLAN tags on its SSIDs. This change is synced to Mesh Nodes allowing Multi-SSID over Mesh to be used just like a cabled network of access points.\u003c\/p\u003e\n\u003ch3\u003e2.5 Gigabit Power-over-Ethernet\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 962C is designed to suit any application, with higher throughput of up to 2.5 Gigabit Ethernet interface, and built-in PoE (Standard IEEE 802.3af Power over Ethernet) as standard, along with the option for powering via DC power supply. Connect the VigorAP to a PoE-enabled Ethernet switch or PoE injector to power it without local power to the unit (power supply) - the VigorAP 962C will take its power from the Ethernet cable.\u003c\/p\u003e\n\u003cp\u003ePoE is ideal for office installations where Ethernet is available but power isn't. It also provides some great management features, the PoE Device Check feature of PoE VigorSwitch switches can monitor and alert if a PoE device stops responding, or providing its services.\u003c\/p\u003e\n\u003cp\u003eIn Mesh wireless networks, where PoE may not be possible, the VigorAP 962C can be powered via DC power supply, with its Ethernet port available for use as an uplink to the Mesh network.\u003c\/p\u003e\n\u003ch3\u003eEasy Setup with the DrayTek Wireless app\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Wireless app assists you with setting up VigorAP 962C access points and a Mesh Wireless network.\u003c\/p\u003e\n\u003cp\u003eOnce installed on your Smartphone or Tablet, use the Quick Start Wizard to set your VigorAPs to operate as a Mesh Wireless network. Set up a single VigorAP 962C as a stand-alone Access Point, or extend an existing wireless network as a Range Extender.\u003c\/p\u003e\n\u003cp\u003eSimply scan the access point’s QR code to detect it, or manually input the VigorAPs default SSID \u0026amp; password, then configure your wireless network with step-by-step guidance.\u003c\/p\u003e\n\u003cp\u003eWhen it’s all set up, view the Mesh Wireless status and connected wireless clients from the app.\u003c\/p\u003e\n\u003cp\u003eWatch Video\u003c\/p\u003e\n\u003ch3\u003eCeiling or Wall Mounted\u003c\/h3\u003e\n\u003cp\u003eFor a convenient and tidy installation, the VigorAP 962C is designed for installation on ceilings and walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms and public spaces.\u003c\/p\u003e\n\u003cp\u003eFor mounting on solid ceilings and walls, a circular mounting plate (included with the unit) is fitted and then the VigorAP 962C is secured into place by twisting the VigorAP into the mounting plate.\u003c\/p\u003e\n\u003cp\u003eFor suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\u003c\/p\u003e\n\u003cp\u003eCabling for the VigorAP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\u003c\/p\u003e\n\u003ch3\u003eAP \u0026amp; Repeater Modes\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 962C is configurable to suit most networks, with AP and Range Extender modes. In addition to its Mesh capability, it's ideal as a stand-alone Access Point to provide Wi-Fi connectivity for routers and networks without wireless.\u003c\/p\u003e\n\u003cp\u003eUse the VigorAP 962C as a Range Extender to connect to any existing wireless network and boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\u003c\/p\u003e\n\u003ch3\u003eCloud Management and More\u003c\/h3\u003e\n\u003cp\u003eDrayTek VigorAP wireless access points can be managed as stand-alone APs with their extensive web user interface.\u003c\/p\u003e\n\u003cp\u003eTo manage more than one access point, either for a single site or spanning multiple sites, DrayTek offer a multitude of options for managing VigorAP access points:\u003c\/p\u003e\n\u003ch4\u003eCloud Management - VigorACS\u003c\/h4\u003e\n\u003cp\u003eDrayTek's VigorACS central management platform makes it possible to manage all DrayTek products from the Cloud or your own private server. DrayTek's access points, switches and routers can all be managed through the VigorACS management portal, with all of the menu options and features available, just as if they were being set up locally. Dashboard view gives a full overview of a VigorAP's status and usage.\u003c\/p\u003e\n\u003cp\u003eVigorACS is great for managing VigorAPs spread across multiple sites, with AP profiles to configure wireless settings, passwords and VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Cloud Management and Multi-Site Management.\u003c\/p\u003e\n\u003cp\u003eTo learn more about DrayTek's VigorACS central management platform, click here.\u003c\/p\u003e\n\u003ch4\u003eRouter-based Central Management\u003c\/h4\u003e\n\u003cp\u003eManaged VigorAP access points centrally through DrayTek Vigor router's web interface, to rapidly provision complex wireless configuration. Ideal for networks with 10 to 50 VigorAP access points, either on a single site or across multiple sites connected via VPN tunnel.\u003c\/p\u003e\n\u003cp\u003eProvision selected groups to configure them all at once. Optional Auto Provisioning provisions VigorAPs straight out of the box with your Wireless configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management and Multi-Site Management via VPN. Up to 50 VigorAP, depending on router model.\u003c\/p\u003e\n\u003ch4\u003eVigorAP-based Central Management\u003c\/h4\u003e\n\u003cp\u003eNew to the VigorAP 962C is the ability to manage all VigorAPs on one site as a group. Simply assign one VigorAP to work as the Root AP and discover other APs on the network to manage them as a group. Any changes made on the root VigorAP can be quickly provisioned to the rest of the group.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Application:\u003c\/strong\u003e Single-Site Management without DrayTek Vigor router. Up to 20 VigorAP.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eAP Assisted Roaming\u003c\/h3\u003e\n\u003cp\u003eLarge wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\u003c\/p\u003e\n\u003cp\u003eDrayTek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, VigorAPs communicate with each other to determine which clients can get a better signal as those clients move around.\u003c\/p\u003e\n\u003cp\u003eIf a client moves into range of another VigorAP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal and better speeds.\u003c\/p\u003e\n\u003cp\u003eClick here to learn more about AP Assisted Roaming.\u003c\/p\u003e\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the wider 5GHz band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003ePer-SSID Client Limit\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eControl the number of clients that can connect to any one SSID on the VigorAP along with limiting data rates, for instance limiting a guest network to 10 clients to avoid overloading or disrupting a more important internal network.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eStation Control\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eLimit connection time for individual devices to the VigorAP. Set the limit from 30 minutes to multiple days, once the timer runs out that user is disconnected from the VigorAP and can't reconnect until the selected Reconnection time has passed. Users connecting to a hospitality Wi-Fi network could be limited to one hour of wireless access, at which point they can't reconnect until 2 hours have elapsed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eIGMP Snooping\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIGMP Multicast traffic broadcasts can use significant amounts of a wireless access point's available throughput. IGMP snooping allows the VigorAP to determine which clients need to receive these IGMP packets on either the 2.4GHz and 5GHz bands. Once enabled, the VigorAP will only send out IGMP packets to clients that have requested to receive it, leaving throughput available to serve more clients effectively.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823025553740,"sku":"CMS-341763","price":147.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_341763.jpg?v=1794089801"},{"product_id":"draytek-vigorap-805-mesh-wireless-access-point-366106","title":"DrayTek VigorAP 805 Wi-Fi 6 Mesh Access Point","description":"The VigorAP 805 is a high-performance Mesh Wireless Access Point. It offers up to 3Gbps dual-band wireless performance and up to 2.5Gb Ethernet connectivity. The second Gigabit Ethernet port can be used as a mini switch to connect a computer or printer.","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823027061068,"sku":"CMS-366106","price":92.87,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_00_366106.jpg?v=1794089823"},{"product_id":"draytek-vigorap-918r-866-mbit-s-white-power-over-ethernet-poe-247406","title":"DrayTek VigorAP 918R Outdoor Mesh Access Point","description":"\u003ch3\u003eVigorAP 918R Series\u003c\/h3\u003e\r\n\u003ch4\u003eOutdoor 802.11ac Mesh Wireless Access Point\u003c\/h4\u003e\r\n\u003cp\u003eVigorAP 918R is a wireless access point designed for outdoor environments. It is ideal for providing wireless access to users and devices in any outdoor scenario, including restaurants, gardens, marinas, educational premises or, really, anywhere where outdoor access is needed.\u003c\/p\u003e\r\n\u003cp\u003eThe VigorAP 918R is a dual-band 802.11ac Wave 2 wireless access point and range extender that can be used a part of a DrayTek Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.\u003c\/p\u003e\r\n\u003cp\u003eInitial setup of the VigorAP 918R is easy with the DrayTek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.\u003cbr\u003e Manage the VigorAP 918R centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point.\u003c\/p\u003e\r\n\u003cp\u003eThe VigorAP 918R has the flexibility to be used how you need it, in any environment.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823027945804,"sku":"CMS-247406","price":240.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_247406.jpg?v=1794089836"},{"product_id":"draytek-vigorap-906","title":"DrayTek VigorAP 906 Wi-Fi 6 Mesh Access Point","description":"\u003cp\u003eDrayTek VigorAP 906\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823028273484,"sku":"CMS-289578","price":185.41,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/image_ed261a0f-243f-4b5d-95ef-da5a7b7c7d09.jpg?v=1794089841"},{"product_id":"draytek-vigorap-903-access-point-219984","title":"DrayTek VigorAP 903 Mesh Wireless Access Point","description":"\u003ch3\u003eVigorAP 903\u003c\/h3\u003e\n\u003ch4\u003eMesh Wireless 802.11ac Range Extender \u0026amp; Access Point\u003c\/h4\u003e\n\u003cp\u003eVigorAP 903 is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.\u003c\/p\u003e\n\u003cp\u003eInitial setup of the VigorAP 903 is easy with the DrayTek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.\u003cbr\u003eManage the VigorAP 903 centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 903 has the flexibility to be used how you need it.\u003c\/p\u003e\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\n\u003cp\u003eMesh Wireless links VigorAP access points across both Wi-Fi and Wired links to cover a large area with a single Wireless network, spanning multiple Wireless Access Points and easily managed from the Mesh Root VigorAP or with the DrayTek Wireless app.\u003c\/p\u003e\n\u003cp\u003eThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2862 and additional VigorAPs join up as Mesh Nodes, which connect wirelessly to the Mesh Root.\u003c\/p\u003e\n\u003cp\u003eYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh, instead of a distant Wi-Fi network with low signal. Internet connectivity relays through the Mesh, using the up to 866Mbps 5GHz wireless as the backhaul link, to relay between Mesh Nodes and avoid long waits for downloads.\u003c\/p\u003e\n\u003ch3\u003eEasy Setup with the DrayTek Wireless app\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Wireless app assists you with setting up VigorAP 903 access points and a Mesh Wireless network.\u003c\/p\u003e\n\u003cp\u003eOnce installed on your Smartphone or Tablet, use the Quick Start Wizard to set your VigorAPs to operate as a Mesh Wireless network. Set up a single VigorAP 903 as a stand-alone Access Point, or extend an existing wireless network as a Range Extender.\u003c\/p\u003e\n\u003cp\u003eSimply scan the access point’s QR code to detect it, or manually input the VigorAPs default SSID \u0026amp; password, then configure your wireless network with step-by-step guidance.\u003c\/p\u003e\n\u003cp\u003eWhen it’s all set up, view the Mesh Wireless status and connected wireless clients from the app.\u003c\/p\u003e\n\u003cp\u003eWatch Video\u003c\/p\u003e\n\u003ch4\u003eSet up a Mesh network with the DrayTek Wireless app\u003c\/h4\u003e\n\u003cp\u003eUse the DrayTek Wireless app to set up a new DrayTek Mesh Wireless network:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eConnect a VigorAP 903 into your network and scan its QR code with the DrayTek Wireless app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eUse the Quick Start Wizard to set it as the Mesh Root and configure the Wireless network name and password\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eConnect up the power to any new Mesh Node APs, such as the VigorAP 802. They will wait the for Mesh Root to adopt them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSearch for new Mesh Nodes with the DrayTek Wireless app and add them to the Mesh group\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eWait a couple of minutes for the VigorAP 903 to auto configure and set up the new Mesh Nodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eYour Mesh wireless network is now ready for use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePower-over-Ethernet\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 has built-in PoE (Standard IEEE 802.3af Power over Ethernet) as standard. Connect the VigorAP to a PoE-enabled Ethernet switch or PoE injector to power it without local power to the unit (power supply) - the VigorAP 903 will take its power from the Ethernet cable. The VigorAP 903 supports Gigabit PoE (if you have a Gigabit PoE switch\/injector) such as our VigorSwitch P1280 or P1092 models (or any other 802.3af\/at device).\u003c\/p\u003e\n\u003cp\u003ePoE is ideal for situations where you do not have mains power available in the exact location where you want to install the VigorAP 903 or just for general aesthetic neatness, perhaps where the AP is installed somewhere prominent.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek VigorAP 903 is also supplied with an AC\/DC mains PSU for installations where you are not using PoE.  \u003c\/p\u003e\n\u003ch3\u003e5 Gigabit Ethernet Ports\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 has five wired Ethernet ports. As the ports are all Gigabit, you can be sure that the AP is fed at the maximum speed in order to fully satisfy the full speed of both 2.4GHz and 5Ghz bands simultaneously.\u003c\/p\u003e\n\u003cp\u003eIn Mesh and Range Extender modes, the VigorAP 903 bridges its wireless uplink to the LAN ports, providing fast connectivity to each additional device connected, without the need for an additional network switch or a long cable run.\u003c\/p\u003e\n\u003cp\u003eLAN Port A1 is also used as the PoE input if you're powering the AP by PoE.\u003c\/p\u003e\n\u003ch3\u003eDual Band 11ac Wave 2 Access Point\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 is an 802.11ac Wave 2 access point, improving performance by increasing the amount of data that can be sent at one time. 11ac Wave 2 includes Multi User MIMO (Multiple In, Multiple Out) or MU-MIMO technology, further building upon the MIMO technologies introduced with 802.11n.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP's MU-MIMO technology when used with MU-MIMO capable wireless clients, allows each antenna (or Spatial Stream) to send to separate wireless clients, potentially doubling the data transmission rate to clients.\u003c\/p\u003e\n\u003cp\u003eSignificant limitations of wireless throughput are the frequency space and radio time, shared between all users. A typical wireless access point can send data to only one client at a time with its radio. With enough users connected, congestion slows down transfer speeds more \u0026amp; more, as the AP divides its time between each client.\u003c\/p\u003e\n\u003cp\u003eMulti User MIMO allows the VigorAP to send data out to more than one wireless client at a time, splitting bandwidth between the VigorAP's Spatial Streams instead of the access point's time as a whole.\u003c\/p\u003e\n\u003cp\u003eThis can be particularly useful in locations with many phones, tablet and laptops connecting, where the VigorAP's more efficient transmissions could allow each access point to serve more clients than an 802.11ac Wave 1 or 802.11n access point.\u003c\/p\u003e\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the less congested and faster 5GHz (802.11n and 802.11ac) band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eAP Assisted Mobility\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAllows VigorAP access points on the network to improve how clients handle moving between VigorAPs. It intelligently allows VigorAPs to disassociate clients from a VigorAP, when the client could get a better connection with a nearer VigorAP access point.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eMobile Device Management\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eControl which type of devices connect to your VigorAP access points, for instance, to stop desktop and laptop computers connecting to a network intended for guest's mobile phones and tablets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWireless Security \u0026amp; VLANs\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 features multiple levels of wireless security. Encryption using WPA2 is available and you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.\u003c\/p\u003e\n\u003cp\u003eFor additional user authentication, you can have the VigorAP 903 authenticate clients with an 802.1x RADIUS (Remote Authentication Dial-in User Service) server, or use its internal RADIUS server.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 903 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether it's different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data.\u003c\/p\u003e\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Mesh system supports 802.1q VLAN tagging for its multiple Wireless networks (or SSIDs), over both wireless and wired Mesh links between VigorAPs.\u003c\/p\u003e\n\u003cp\u003eEach SSID provided by the Mesh network can have a VLAN tag assigned to it. VLAN tags are interpreted by the network's router and switch(es) to segregate one network from another. For instance keeping devices connecting to a guest network separate from resources on the private, internal network.\u003c\/p\u003e\n\u003cp\u003eSetting up a Mesh network to work with VLANs only requires setting up the Mesh Root with the VLAN tags on its SSIDs. This change propagates to Mesh Nodes when syncing the configuration between access points and Multi-SSID over Mesh can be used just like a cabled network of access points.  \u003cem\u003e(requires firmware 1.3.4, available now)\u003c\/em\u003e \u003c\/p\u003e\n\u003ch3\u003eAP \u0026amp; Repeater Modes\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 can be used as a stand-alone Wireless Access Point, to provide wireless connectivity for a router or network that doesn't currently have wireless.\u003c\/p\u003e\n\u003cp\u003eAccess Point mode can create up to 4 separate Wireless networks (or SSIDs). The VigorAP 903 can provide completely separate private and guest wireless networks through the use of 802.1q VLAN tags with a router or network that supports VLAN tagging, such as the DrayTek Vigor 2862 router.\u003c\/p\u003e\n\u003cp\u003eRange Extender (or Universal Repeater) mode allows the VigorAP 903 to extend the wireless coverage of any existing wireless network. In this mode, the VigorAP 903 connects to a remote wireless network, allowing it to provide Internet and Network access to wireless clients that connect to the VigorAP 903's wireless network.\u003c\/p\u003e\n\u003ch3\u003eMesh - Auto-Optimisation\u003c\/h3\u003e\n\u003cp\u003eA DrayTek Mesh Wireless network can easily add new Mesh Nodes and self-organises links between up to 8 DrayTek VigorAP access points, to ensure the best possible speeds.\u003c\/p\u003e\n\u003cp\u003eIf a Mesh Node's wireless uplink drops out, for instance if there's interference or the VigorAP it connects to is turned off, each Mesh VigorAP automatically re-connects to the next available point to resumes service without any manual intervention required.\u003c\/p\u003e\n\u003cp\u003eMesh Nodes further away will connect wirelessly to the nearest Mesh Node, with up to 3 wireless hops.\u003c\/p\u003e\n\u003cp\u003eAlternatively, where a network connection is available for a VigorAP, join a Mesh Node to the network through ethernet and nearby wireless Mesh Nodes can join it instead of the Mesh Root to reduce wireless hops and increase possible Mesh throughput.\u003c\/p\u003e\n\u003ch3\u003eCentral Management with DrayTek VigorACS\u003c\/h3\u003e\n\u003cp\u003eThe DrayTek VigorAP 903 can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the \u003cstrong\u003eConfiguration\u003c\/strong\u003e section of VigorACS.\u003c\/p\u003e\n\u003cp\u003eProfiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration \u0026gt; AP Profile to configure profiles and apply them selectively.\u003c\/p\u003e\n\u003cp\u003eDrayTek's VigorACS management monitors each VigorAP access point, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eManaging a VigorAP in VigorACS\u003c\/p\u003e\n\u003cp\u003eFor further details of the VigorACS central management system, \u003cstrong\u003e click here \u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eCentral Management with a DrayTek Router\u003c\/h3\u003e\n\u003cp\u003e \u003cbr\u003eProvision \u0026amp; Manage VigorAPs with a DrayTek Vigor router\u003c\/p\u003e\n\u003cp\u003eFor further details of the central management feature, \u003cstrong\u003e click here \u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 903 can operate in standalone autonomous mode, but can also form part of a centrally managed wireless installation by adding a compatible DrayTek wireless controller such as the Vigor 2862 router. This enables you to centrally control, manage and administer multiple AP devices installed around your building\/campus. Management also enables efficient usage of your wireless access point through load-balancing, whereby wireless clients are distributed across several access points to reduce congestion.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek router operating as the wireless controller can provision DrayTek VigorAP access points using the Central AP Management profiles configured on the router, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network.\u003c\/p\u003e\n\u003ch3\u003eLocal Temperature Logging and Alarm\u003c\/h3\u003e\n\u003cp\u003eAs your VigorAP 903 unit(s) will be distributed around your building, it's an ideal opportunity to also gather environmental information about those locations. By the addtition of an optional USB temperature sensor, your VigorAP 903 can report real-time local temperature information, show the previous 24 hour's chart and also set high\/low alarms to alert\/log if the temperature falls above or below your set levels. This facility is ideal for detecting if any part of your building is over or under-heated or if heating\/cooling has been left on overnight and therefore helping to make more efficient use of your heating or cooling energy consumption, potentially saving cost.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 903's USB interface can instead connect to a regular printer. That printer is then accessible from any wireless or wired PC which connects to the VigorAP 903, or a PC anywhere else on the network. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home\/office by using a pair of VigorAP 903s to make a bridge.\u003c\/p\u003e\n\u003ch3\u003eWireless On\/Off Switch \u0026amp; WiFi Protected Setup\u003c\/h3\u003e\n\u003cp\u003eThe WLAN On\/Off \u0026amp; WPS button on the VigorAP 903 serves as a physical on\/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active.\u003c\/p\u003e\n\u003cp\u003eWireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration to 'pair' wireless devices such as printers with the VigorAP's wireless network. When WPS is enabled, press and hold the WPS button, then activate WPS on your wireless device; the two devices then automatically exchange encryption keys. WPS can be disabled if not required or for more security.\u003c\/p\u003e\n\u003ch3\u003eDual-LAN\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 903 can support two completely independent LANs. Each is connected via its own independent RJ45 Ethernet interface. There are Ethernet RJ45 interfaces for LAN A (4 ports) and LAN B (one port). These networks remain completely isolated from each other.\u003c\/p\u003e\n\u003cp\u003eEach LAN can be assigned its own separate Wireless SSID so they remain separated even on the Wireless LAN. This is the equivalent of having two completely separate access points and ideal for public and private networks in the same location or wireless LANs for two separate companies.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823028306252,"sku":"CMS-219984","price":152.09,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_219984.jpg?v=1794089842"},{"product_id":"draytek-poe600-k-wireless-access-point-accessory-poe-injector-250223","title":"DrayTek VigorPoE-600 High Power PoE Injector","description":"\u003ch3\u003eDrayTek VigorPoE-600 - High Power PoE Injector for VigorAP 918RPD\u003c\/h3\u003e\r\n\u003cp\u003eThe VigorAP 918RPD and VigorAP 920RPD outdoor access points have a secondary LAN port that provides PoE Output (PoE-PSE), to power an additional PoE device through a single cable run.\u003c\/p\u003e\r\n\u003cp\u003eUse the DrayTek VigorPoE-600 High-Power PoE Injector to power additional devices through the VigorAP 918RPD's secondary LAN port.\u003c\/p\u003e\r\n\u003cp\u003eThis powers the VigorAP 918RPD and provides up to 16 watts power output to the device connected to the VigorAP's PoE Out port, over a 100 meter CAT5e\/CAT6 cable run. Connect a camera near to the VigorAP, or daisy-chain an additional AP through the one cable.\u003c\/p\u003e\r\n\u003cp\u003ePlease note, this POE Injector is proprietary and is for use with the DrayTek VigorAP 918RPD\/920RPD only.  \u003c\/p\u003e\r\n\u003cp\u003eThe VigorPoE-600 is not directly compatible with 802.3af \/ at PoE products.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823028371788,"sku":"CMS-250223","price":54.61,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_250223.jpg?v=1794089843"},{"product_id":"draytek-vap1060c-k-wireless-access-point-2400-mbit-s-white-power-over-ethernet-poe-262715","title":"DrayTek VigorAP 1060C Wi-Fi 6 Ceiling Access Point","description":"\u003cb\u003eWi-Fi 6 - Fast \u0026amp; Efficient\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe DrayTek VigorAP 1060C is a Wi-Fi 6 AX3600 access point with 2.5Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users and devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\u003cbr\u003eThis powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\u003cbr\u003e\u003cbr\u003e\u003cb\u003e2.5 Gigabit Power-over-Ethernet\u003c\/b\u003e\u003cbr\u003eThe VigorAP 1060C is designed to suit any application, with higher throughput of up to 2.5 Gigabit Ethernet interface, and built-in PoE (Standard IEEE 802.3af Power over Ethernet) as standard, along with the option for powering via DC power supply. Connect the VigorAP to a PoE-enabled Ethernet switch or PoE injector to power it without local power to the unit (power supply) - the VigorAP 1060C will take its power from the Ethernet cable.\u003cbr\u003e\u003cbr\u003ePoE is ideal for office installations where Ethernet is available but power isn't. It also provides some great management features, the PoE Device Check feature of PoE VigorSwitch switches can monitor and alert if a PoE device stops responding, or providing its services.\u003cbr\u003e\u003cbr\u003eIn Mesh wireless networks, where PoE may not be possible, the VigorAP 1060C can be powered via DC power supply, with its Ethernet port available for use as an uplink to the Mesh network.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCeiling or Wall Mounted\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor a convenient and tidy installation, the VigorAP 1060C is designed for installation on ceilings and walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms and public spaces.\u003cbr\u003e\u003cbr\u003eFor mounting on solid ceilings and walls, a circular mounting plate (included with the unit) is fitted and then the VigorAP 1060C is secured into place by twisting the VigorAP into the mounting plate.\u003cbr\u003e\u003cbr\u003eFor suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\u003cbr\u003e\u003cbr\u003eCabling for the VigorAP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAP \u0026amp; Repeater Modes\u003c\/b\u003e\u003cbr\u003eThe VigorAP 1060C is configurable to suit most networks, with AP and Range Extender modes. In addition to its Mesh capability, it's ideal as a stand-alone Access Point to provide Wi-Fi connectivity for routers and networks without wireless.\u003cbr\u003e\u003cbr\u003eUse the VigorAP 1060C as a Range Extender to connect to any existing wireless network and boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCloud Management and More\u003c\/b\u003e\u003cbr\u003eDrayTek VigorAP wireless access points can be managed as stand-alone APs with their extensive web user interface.\u003cbr\u003e\u003cbr\u003eTo manage more than one access point, either for a single site or spanning multiple sites, DrayTek offer a multitude of options for managing VigorAP access points:\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCloud Management - VigorACS\u003c\/b\u003e\u003cbr\u003eDrayTek's VigorACS central management platform makes it possible to manage all DrayTek products from the Cloud or your own private server. DrayTek's access points, switches and routers can all be managed through the VigorACS management portal, with all of the menu options and features available, just as if they were being set up locally. Dashboard view gives a full overview of a VigorAP's status and usage.\u003cbr\u003e\u003cbr\u003eVigorACS is great for managing VigorAPs spread across multiple sites, with AP profiles to configure wireless settings, passwords and VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCeiling or Wall Mounted\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor a convenient and tidy installation, the VigorAP 1060C is designed for installation on ceilings and walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms and public spaces.\u003cbr\u003e\u003cbr\u003eFor mounting on solid ceilings and walls, a circular mounting plate (included with the unit) is fitted and then the VigorAP 1060C is secured into place by twisting the VigorAP into the mounting plate.\u003cbr\u003e\u003cbr\u003eFor suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\u003cbr\u003e\u003cbr\u003eCabling for the VigorAP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAP \u0026amp; Repeater Modes\u003c\/b\u003e\u003cbr\u003eThe VigorAP 1060C is configurable to suit most networks, with AP and Range Extender modes. In addition to its Mesh capability, it's ideal as a stand-alone Access Point to provide Wi-Fi connectivity for routers and networks without wireless.\u003cbr\u003e\u003cbr\u003eUse the VigorAP 1060C as a Range Extender to connect to any existing wireless network and boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMobile Device Management\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThrough the web interface of the VigorAP 1060C, network administrators can easily check on AP data usage and clients connected, with options to disconnect or block disruptive clients.\u003cbr\u003e\u003cbr\u003eMobile Device Management builds on regular Access Control, which can be used to whitelist and blacklist individual clients. MDM makes it possible to set up SSIDs that only Windows or Apple desktops can connect to, disconnecting Android or iOS clients or vice versa, to suit the requirements of your wireless network.\u003cbr\u003e\u003cbr\u003eAnalytics data from each VigorAP graphs how many wireless clients have connected to the AP over time, as well as how many wireless clients passed by without connecting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAP Assisted Roaming\u003c\/b\u003e\u003cbr\u003eLarge wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\u003cbr\u003e\u003cbr\u003eDrayTek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, VigorAPs communicate with each other to determine which clients can get a better signal as those clients move around.\u003cbr\u003e\u003cbr\u003eIf a client moves into range of another VigorAP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal and better speeds.","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823029027148,"sku":"CMS-262715","price":308.79,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_262715.jpg?v=1794089852"},{"product_id":"draytek-vigorap-1000c-866-mbit-s-white-power-over-ethernet-poe-247464","title":"DrayTek VigorAP 1000C Tri-Band Mesh Ceiling Access Point","description":"\u003ch3\u003eVigorAP 1000C\u003c\/h3\u003e\n\u003ch4\u003eTri-Band Ceiling-mount Mesh Wireless 802.11ac Access Point\u003c\/h4\u003e\n\u003cp\u003eVigorAP 1000C is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 1000C is a Tri-Band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling. Dedicate a 5Ghz radio as a Mesh Backhaul for increased Mesh performance and client capacity.\u003c\/p\u003e\n\u003cp\u003eInitial setup of the VigorAP 1000C is easy with the DrayTek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.\u003cbr\u003eManage the VigorAP 1000C centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 1000C has the flexibility to be used how you need it.\u003c\/p\u003e\n\u003ch3\u003eMesh Wireless\u003c\/h3\u003e\n\u003cp\u003eMesh Wireless links VigorAP access points across both Wi-Fi and Wired links to cover a large area with a single Wireless network, spanning multiple Wireless Access Points and easily managed from the Mesh Root VigorAP or with the DrayTek Wireless app.\u003c\/p\u003e\n\u003cp\u003eThe Mesh Root VigorAP links up to your existing Internet router, such as the DrayTek Vigor 2862ac and additional VigorAPs join up as Mesh Nodes, which connect wirelessly to the Mesh Root.\u003c\/p\u003e\n\u003cp\u003eYour devices see a single Wi-Fi network (SSID) and connect to the nearest VigorAP in the Mesh, instead of a distant Wi-Fi network with low signal. Internet connectivity relays through the Mesh, using the up to 866Mbps 5GHz wireless as the backhaul link, to relay between Mesh Nodes and avoid long waits for downloads.\u003c\/p\u003e\n\u003cp\u003eOne of the VigorAP 1000C's 5GHz 802.11ac radios can be dedicated as a Mesh backhaul. Providing higher performance and capacity for Mesh networks spanning multiple hops and managing more clients.\u003c\/p\u003e\n\u003ch3\u003eEasy Setup with the DrayTek Wireless app\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Wireless app assists you with setting up VigorAP 1000C access points and a Mesh Wireless network.\u003c\/p\u003e\n\u003cp\u003eOnce installed on your Smartphone or Tablet, use the Quick Start Wizard to set your VigorAPs to operate as a Mesh Wireless network. Set up a single VigorAP 1000C as a stand-alone Access Point, or extend an existing wireless network as a Range Extender.\u003c\/p\u003e\n\u003cp\u003eSimply scan the access point’s QR code to detect it, or manually input the VigorAPs default SSID \u0026amp; password, then configure your wireless network with step-by-step guidance.\u003c\/p\u003e\n\u003cp\u003eWhen it’s all set up, view the Mesh Wireless status and connected wireless clients from the app.\u003c\/p\u003e\n\u003cp\u003eWatch Video\u003c\/p\u003e\n\u003ch4\u003eSet up a Mesh network with the DrayTek Wireless app\u003c\/h4\u003e\n\u003cp\u003eUse the DrayTek Wireless app to set up a new DrayTek Mesh Wireless network:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eConnect a VigorAP 1000C into your network and scan its QR code with the DrayTek Wireless app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eUse the Quick Start Wizard to set it as the Mesh Root and configure the Wireless network name and password\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eConnect up the power to any new Mesh Node APs, such as the VigorAP 802. They will wait the for Mesh Root to adopt them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eSearch for new Mesh Nodes with the DrayTek Wireless app and add them to the Mesh group\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eWait a couple of minutes for the VigorAP 1000C to auto configure and set up the new Mesh Nodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eYour Mesh wireless network is now ready for use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e2 Gigabit Ports with Power-over-Ethernet\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 1000C has built-in PoE+ (Standard IEEE 802.3at Power over Ethernet) as standard. Connect the VigorAP to a PoE+ Ethernet switch or PoE+ injector to power it without local power to the unit (power supply) - the VigorAP 1000C will take its power from the Ethernet cable. The VigorAP 1000C supports Gigabit PoE (if you have a Gigabit PoE switch\/injector) such as our VigorSwitch P1280 or P1092 models (or any other 802.3at device).\u003c\/p\u003e\n\u003cp\u003ePoE is ideal for situations where you do not have mains power available in the exact location where you want to install the VigorAP 1000C or just for general aesthetic neatness, perhaps where the AP is installed somewhere prominent.\u003c\/p\u003e\n\u003cp\u003eThe second Gigabit LAN port can be used to connect an additional device such as a camera or network switch to the VigorAP. When the VigorAP is operating in Mesh mode, the LAN ports are bridged to the wireless network, to connect additional devices into the Mesh network.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek VigorAP 1000C can alternatively be powered by an AC\/DC mains PSU, for installations where you are not using PoE. \u003c\/p\u003e\n\u003ch3\u003eCeiling Mounting\u003c\/h3\u003e\n\u003cp\u003eFor ceiling mounting, a mounting plate (included with the unit) is fitted and then the VigorAP 1000C is secured into place by sliding the VigorAP into the mounting plate. Once installed, the AP is held securely in place.\u003c\/p\u003e\n\u003cp\u003eThe AP-1000C is designed to be installed on ceilings in order to serve the area below it. The cables (Ethernet or Power) can reach the AP-1000C from the rear or the side. For solid ceiling fixing a backplate is supplied. The backplate affixes to the ceiling and the AP-1000C then clips in.\u003c\/p\u003e\n\u003ch3\u003eTri-Band 11ac Wave 2 Access Point\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 1000C is an 802.11ac Wave 2 access point, improving performance by increasing the amount of data that can be sent at one time. 11ac Wave 2 uses MU-MIMO (Multi-User Multiple In, Multiple Out) technology to boost performance \u0026amp; capacity, building upon the Single-User (SU-MIMO) technologies introduced with 802.11n.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP's MU-MIMO technology when used with MU-MIMO capable wireless clients, allows each antenna (or Spatial Stream) to send to separate wireless clients at the same time, potentially doubling the data transmission rate to clients.\u003c\/p\u003e\n\u003cp\u003eA typical wireless access point can send data to only one client at a time with its radio. With enough users connected, congestion slows down transfer speeds more \u0026amp; more, as the AP is shared between more clients.\u003c\/p\u003e\n\u003cp\u003eThis can be particularly useful in locations with many phones, tablet and laptops connecting, where the VigorAP's more efficient transmissions could allow each access point to serve more clients than an 802.11ac Wave 1 or 802.11n access point.\u003c\/p\u003e\n\u003ch3\u003eWireless Optimisation\u003c\/h3\u003e\n\u003cp\u003eDrayTek's VigorAP access points have many features designed to improve wireless performance on your network, to ensure that every wireless client gets the best possible experience. Learn More\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eAirtime Fairness\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAims to maximise the total wireless throughput by improving how time is shared between wireless clients to prevent slower clients from negatively affecting other users and to enable faster clients to obtain higher speeds that they're capable of.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eBand Steering\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIncreases capacity for Vigor Access Points by directing wireless clients, that are capable of connecting to 5GHz wireless networks, to the less congested and faster 5GHz (802.11n and 802.11ac) band. The aim is to more evenly distribute wireless clients between the AP's wireless radios.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eAP Assisted Mobility\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAllows VigorAP access points on the network to improve how clients handle moving between VigorAPs. It intelligently allows VigorAPs to disassociate clients from a VigorAP, when the client could get a better connection with a nearer VigorAP access point.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch4\u003eMobile Device Management\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003ctd\u003eControl which type of devices connect to your VigorAP access points, for instance, to stop desktop and laptop computers connecting to a network intended for guest's mobile phones and tablets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWireless Security \u0026amp; VLANs\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 1000C features multiple levels of wireless security. Encryption using WPA2 \/ WPA3 is available and you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.\u003c\/p\u003e\n\u003cp\u003eFor additional user authentication, you can have the VigorAP 1000C authenticate clients with an 802.1x RADIUS (Remote Authentication Dial-in User Service) server, or use its internal RADIUS server.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 1000C supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether it's different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data.\u003c\/p\u003e\n\u003ch3\u003eMulti-SSID over Mesh\u003c\/h3\u003e\n\u003cp\u003eDrayTek's Mesh system supports 802.1q VLAN tagging for its multiple Wireless networks (or SSIDs), over both wireless and wired Mesh links between VigorAPs.\u003c\/p\u003e\n\u003cp\u003eEach SSID provided by the Mesh network can have a VLAN tag assigned to it. VLAN tags are interpreted by the network's router and switch(es) to segregate one network from another. For instance keeping devices connecting to a guest network separate from resources on the private, internal network.\u003c\/p\u003e\n\u003cp\u003eSetting up a Mesh network to work with VLANs only requires setting up the Mesh Root with the VLAN tags on its SSIDs. This change propagates to Mesh Nodes when syncing the configuration between access points and Multi-SSID over Mesh can be used just like a cabled network of access points.\u003c\/p\u003e\n\u003ch3\u003eAP \u0026amp; Repeater Modes\u003c\/h3\u003e\n\u003cp\u003eThe VigorAP 1000C can be used as a stand-alone Wireless Access Point, to provide wireless connectivity for a router or network that doesn't currently have wireless.\u003c\/p\u003e\n\u003cp\u003eAccess Point mode can create up to 4 separate Wireless networks (or SSIDs). The VigorAP 1000C can provide completely separate private and guest wireless networks through the use of 802.1q VLAN tags with a router or network that supports VLAN tagging, such as the DrayTek Vigor 2862 router.\u003c\/p\u003e\n\u003cp\u003eRange Extender (or Universal Repeater) mode allows the VigorAP 1000C to extend the wireless coverage of any existing wireless network. In this mode, the VigorAP 1000C connects to a remote wireless network, allowing it to provide Internet and Network access to wireless clients that connect to the VigorAP 1000C's wireless network.\u003c\/p\u003e\n\u003ch3\u003eMesh - Auto-Optimisation\u003c\/h3\u003e\n\u003cp\u003eA DrayTek Mesh Wireless network can easily add new Mesh Nodes and self-organises links between up to 8 DrayTek VigorAP access points, to ensure the best possible speeds.\u003c\/p\u003e\n\u003cp\u003eIf a Mesh Node's wireless uplink drops out, for instance if there's interference or the VigorAP it connects to is turned off, each Mesh VigorAP automatically re-connects to the next available point to resumes service without any manual intervention required.\u003c\/p\u003e\n\u003cp\u003eMesh Nodes further away will connect wirelessly to the nearest Mesh Node, with up to 3 wireless hops.\u003c\/p\u003e\n\u003cp\u003eAlternatively, where a network connection is available for a VigorAP, join a Mesh Node to the network through ethernet and nearby wireless Mesh Nodes can join it instead of the Mesh Root to reduce wireless hops and increase possible Mesh throughput.\u003c\/p\u003e\n\u003ch3\u003eCentral Management with DrayTek VigorACS\u003c\/h3\u003e\n\u003cp\u003eThe DrayTek VigorAP 1000C can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the \u003cstrong\u003eConfiguration\u003c\/strong\u003e section of VigorACS.\u003c\/p\u003e\n\u003cp\u003eProfiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration \u0026gt; AP Profile to configure profiles and apply them selectively.\u003c\/p\u003e\n\u003cp\u003eDrayTek's VigorACS management monitors each VigorAP access point, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eManaging a VigorAP in VigorACS\u003c\/p\u003e\n\u003cp\u003eFor further details of the VigorACS central management system, \u003cstrong\u003e click here \u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eCentral Management with a DrayTek Router\u003c\/h3\u003e\n\u003cp\u003e \u003cbr\u003eProvision \u0026amp; Manage VigorAPs with a DrayTek Vigor router\u003c\/p\u003e\n\u003cp\u003eFor further details of the central management feature, \u003cstrong\u003e click here \u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe VigorAP 1000C can operate in standalone autonomous mode, but can also form part of a centrally managed wireless installation by adding a compatible DrayTek wireless controller such as the Vigor 2862 router. This enables you to centrally control, manage and administer multiple AP devices installed around your building\/campus. Management also enables efficient usage of your wireless access point through load-balancing, whereby wireless clients are distributed across several access points to reduce congestion.\u003c\/p\u003e\n\u003cp\u003eThe DrayTek router operating as the wireless controller can provision DrayTek VigorAP access points using the Central AP Management profiles configured on the router, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network.\u003c\/p\u003e","brand":"DrayTek","offers":[{"title":"Default Title","offer_id":59823029092684,"sku":"CMS-247464","price":227.36,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1103\/5502\/2156\/files\/product_images_zoom__zoom_0_247464.jpg?v=1794089852"}],"url":"https:\/\/lunarsupply.co.uk\/collections\/wifi-access-points.oembed","provider":"Lunar Supply Co","version":"1.0","type":"link"}